The horsepower war between FCA and Ford has spilled over to the Ram and the F-150 from the Challenger and Mustang. PHOTO: FCA

The horsepower war between FCA and Ford has spilled over to the Ram and the F-150 from the Challenger and Mustang. PHOTO: FCA

The Auto Sleuth

New Ram, new GMC utility in the works, a Bugatti Baby and more

• New 702-horsepower Ram puts the Raptor on notice:

Ford owns the off-road pickup category with the Raptor, but that dominance will be put to the test by the 2021 Ram Rebel TRX. The new model comes with a 702-horsepower supercharged 6.2-litre V-8 that’s identical to the engine installed in the Dodge Challenger Hellcat model. There’s also 650-pound-feet of torque.

Apparently Ford has accepted the challenge and will answer by installing the supercharged 5.2-litre V-8 that originates with the Mustang Shelby GT500. That engine makes 760 horsepower and has a torque rating of 625 pound-feet. There’s no word from General Motors as to if, or when, the company might join the fight with a sand- and-mud-conquering Silverado or Sierra pickup.

The upcoming QX55 is the new blood that the brand needs as it attempts a revival. ILLUSTRATION: INFINITI

The upcoming QX55 is the new blood that the brand needs as it attempts a revival. ILLUSTRATION: INFINITI

• The Infiniti QX series takes the coupe route:

It’s common for upscale automakers to convert squared-off utility models into more attractive (but less roomy) hatchbacks. The latest such brand is Nissan’s Infiniti division, which will reveal the QX50-based QX55 this fall for the 2022 model year. It will also be the first of a number of new gasoline and electric vehicles to wear the Infiniti logo as Nissan attempts to revive what has become a slow-selling brand.

The QX55 will likely use a turbocharged 2.0-litre four-cylinder engine that in the QX50 makes 268 horsepower and 280 pound-feet of torque. The Sleuth is hearing that those numbers might be increased slightly to give the “coupe” a bit more dash with its flash.

• A small GMC utility vehicle is in the works:

The platform and drivetrain used for the Chevrolet Trailblazer and Buick Encore GX are rumoured to form the basis for a similar GMC model. In fact, the General Motors division displayed just such a model a decade ago and labeled it the Granite. Whatever the name, you can expect it to be fitted with a 137-horsepower turbocharged 1.2-litre three-cylinder engine, or an optional turbo 1.3-litre three-cylinder producing 155 horses. The 1.2 uses a continuously variable transmission, while the 1.3 gets a nine-speed automatic. Should this littlest GMC make it to production, it would likely be for the 2022 model year at the earliest.

• Ford is planning a third pickup to slot below the Ranger:

Not content to stick to the full-size and midsize truck classes with the F-150 and Ranger, respectively, Ford is apparently developing a small compact pickup for the 2022 model year to round out its range of haulers.

Maverick is one possible name, but it likely won’t be a particularly tough pickup since it will employ a unitized structure that’s similar to that of the current Ford Escape. That would position the Maverick in direct competition with the upcoming 2021 Hyundai Santa Cruz. It would also offer the same range of turbocharged three- and four-cylinder engines as the Escape, which produce 180 and 250 horsepower, respectively.

Chevrolet trotted out a more aggressive looking Corvette (it was the pace car) at a recent race at Road America in Wisconsin. PHOTO: CORVETTE RACING VIA TWITTER

Chevrolet trotted out a more aggressive looking Corvette (it was the pace car) at a recent race at Road America in Wisconsin. PHOTO: CORVETTE RACING VIA TWITTER

• Is a special-edition Corvette coming soon?

It’s no secret that Chevrolet will introduce more potent versions of its mid-engine Stingray sports car over the next year or two. One such model is speculated to be the Stingray R, a version of which recently served as a pace car at the Road America racetrack near Elkhart Lake, Wis. That ’Vette had unique front and rear spoilers that would be ideal for owners who enjoy outings at their local race facility or at a parking-lot autocross.

There’s no word as to the R’s output, but it’s conceivable that the current 495 horsepower V-8 would be elevated to somewhere in the vicinity of 560 horses. That would be a nice bump while still leaving plenty of room for the upcoming Z06 performance model to grab headlines. The Sleuth’s guess is somewhere around 700 horsepower.

_______

UPS AND DOWNS

The Baby II is a three-quarter-scale version of the Type 35 racecar from the 1920s. PHOTO: BUGATTI

The Baby II is a three-quarter-scale version of the Type 35 racecar from the 1920s. PHOTO: BUGATTI

Up: Buy a new Bugatti for US $35,000:

The company that sells the multi-million-dollar Chiron supercar is making three-quarter-scale versions of the brand’s classic Type 35 racecar that dates back to the 1920s. Called the Baby II (the original Baby was half-scale replica), it uses a 13.4-horsepower electric motor and has a top speed of about 65 km/h. Nearly all of the 500 examples are reserved.

Bentley is producing 12 more 1929 Blower cars in a “Continuation Series.” PHOTO: BENTLEY

Bentley is producing 12 more 1929 Blower cars in a “Continuation Series.” PHOTO: BENTLEY

Up: 1929 Bentley Blower redux:

With the help of 3D laser-scanning technology, the VW Group’s luxury division has commissioned a “Continuation Series” of one of the earliest supercharged racecars. All of the Blower’s components — including body panels, chassis and 4.5-litre four-cylinder engine — will be identical to the original. The release date for the 12 additional cars hasn’t been announced. Prices start in the US $2-million range.

AutomotivecarsTrucks

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

During our recent conversation, John Nicholson showed me snapshots of his time working on the Yukon riverboats 70 years ago. (Michael Gates)
History Hunter: Yukon man relives the riverboat days after seven decades

John Nicholson took summer work on Yukon steamers in the 1950s

Whitehorse City Hall at its Steele Street entrance. (Stephanie Waddell/Yukon News)
Change of plans approved for city hall

Project would see 1966 city hall demolished

A city map shows the property at 107 Range Road. The zoning is now in place for developers to proceed with plans for a Dairy Queen drive-thru. If plans proceed on schedule the new restaurant is anticipated to open in October. (Cyrstal Schick/Yukon News)
October opening eyed for Dairy Queen

Will depend on everything going according to plan

NDP candidate Annie Blake, left, and Liberal incumbent Pauline Frost. (Submitted photos)
Official recount confirms tie vote in Vuntut Gwitchin riding

Both candidates Pauline Frost and Annie Blake are still standing with 78 votes each

Artist’s rendering of a Dairy Queen drive-thru. At its April 13 meeting, Whitehorse city council approved a zoning change to allow a drive-thru at 107 Range Road. Developers sought the change to build a Dairy Queen there. (Submitted)
Drive-thru approved by Whitehorse city council at 107 Range Road

Rezoning could pave the way for a Dairy Queen

Joel Krahn/joelkran.com Hikers traverse the Chilkoot Trail in September 2015. Alaska side.
The Canadian side of the Chilkoot Trail will open for summer

The Canadian side of the Chilkoot Trail will open for summer Parks… Continue reading

Letters to the editor.
Today’s mailbox: Hands of Hope, the quilt of poppies

Toilets are important Ed. note: Hands of Hope is a Whitehorse-based non-profit… Continue reading

Whitehorse City Hall (Yukon News file)
City news, briefly

A look at city council matters for the week of April 12

École Whitehorse Elementary Grade 7 students Yumi Traynor and Oscar Wolosewich participated in the Civix Student Vote in Whitehorse on April 12. (Haley Ritchie/Yukon News)
Yukon Student Vote chooses Yukon Party government; NDP take popular vote

The initiative is organized by national non-profit CIVIX

Yvonne Clarke is the newly elected Yukon Party MLA for Porter Creek Centre. (Submitted/Yukon Party)
Yvonne Clarke elected as first Filipina MLA in the Yukon Legislative Assembly

Clarke beat incumbent Liberal Paolo Gallina in Porter Creek Centre

Emily Tredger at NDP election night headquarters after winning the Whitehorse Centre riding. (Stephanie Waddell/Yukon News)
Emily Tredger takes Whitehorse Centre for NDP

MLA-elect ready to get to work in new role

Chief Medical Officer of Health Dr. Brendan Hanley. (Crystal Schick/Yukon News)
Two new cases of COVID-19 variant identified in territory

“If variants were to get out of control in the Yukon, the impact could be serious.”

lwtters
Today’s Mailbox: Rent freezes and the youth vote

Dear Editor, I read the article regarding the recommendations by the Yukon… Continue reading

Most Read